HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch event message - Page 41
R_A_TOV or E_D_TOV has been, The destination for the receive frame is in
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Table 5 Critical event messages and descriptions (Continued) Icon Event ID and message Description (C) (8600.0017) (PortApp) (External port license count exceeded, downing external port port_number) The named external port is down because the number of licensed external ports has been exceeded. (C) (8600.0018) (PortApp) (External port license became available, re-starting downed external ports) An external port that was previously down because of insufficient port licenses is now online. (C) (8600.0019) (PortApp) (Internal port license count exceeded, downing internal port port_number) A device attempted to log in to an internal port, but a license was not available. A license upgrade may be required, or a license may be released by downing ports. (C) (8600.001A) (PortApp) (Internal port license became available, re-starting downed internal ports) (C) (8700.0007) (EPort) (Port: port_number) (Received frame from address not in Access Control List (ACL) hard zone (src address = FC_address, dest address = FC_address)) (C) (8700.000D) (EPort) (Port: port_number) (Resetting Inter-Switch Link (ISL), a time out value has been reconfigured.) A license has become available and ports that had been previously downed to due to unavailable licenses will be restarted. The destination for the receive frame is in a hard zone and the source is not. The frame will not be forwarded. R_A_TOV or E_D_TOV has been reconfigured. E_Ports will be automatically reset to inform the neighbor switch of the change. (C) (8700.000E) (EPort) (Port: port_number) (InteropCredit value was reconfigured, resetting port.) The InteropCredit parameter has changed. The affected port will be automatically reset. (C) (8700.000F) (EPort) (Port: port_number) (Broadcast frame received & broadcast disabled, discarding broadcast frames.) Broadcast is disabled and the switch has received a broadcast frame. Enable broadcast to receive broadcast frames. (C) (8700.0010) (EPort) (Port: port_number) (Inter-Switch Link (ISL) unstable. ISL init will be held back until ISL up time is 5 seconds) The Fabric inter-switch link (ISL) is unstable, indicating that the media module or the cable is bad. (C) (8700.0011) (Eport) (Port: port_number) (Connection failure, remote switch not compatible) The remote switch is not compatible with the local switch. The E_Port cannot exchange switch capabilities with the remote switch. (C) (8700.0012) (Eport) (Port: port_number) (Connection failure, fabric limited to two switches) The switch cannot be connected to the fabric due to a license restriction. (C) (8700.0013) (Connection failure, fabric limited to two switches) The switch cannot be connected to the fabric due to license restriction. (C) (8B00.0005) (Unable to test The test of the named profile failed because profile profile because the CallHome the Call Home service is disabled. service is disabled) 8/20q Fibre Channel Switch event messages reference guide 41