HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch event message - Page 23
local switch., A fabric binding
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1004.0036) (Domain ID domain_ID assigned to different switches. Cannot join fabrics.) An attempt was made to join two fabrics that had switches with the same domain_ID. Change the domain_ID on one of the switches so that it is unique, and then join the fabrics again. (A1004.0037) (Fabric Binding Error - please reconfigure: Local switch assigned domain domain_ID which is locked, fabric binding indicates domain domain_ID should be used.) (A1004.0038) (WorldWide Name (WWN) device_WWN assigned domain domain_ID, fabric binding indicates this domain is reserved for device_WWN.) (A1004.0039) (WorldWide Name (WWN) device_WWN currently in fabric, no fabric binding in active security set for this WWN.) (A1004.003F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not allowed to join fabric.) (A1004.0040) (World Wide Name (WWN) device_WWN assigned domain domain_ID, fabric binding indicates it should use domain_ID.) (A1004.0041) (Eport isolating due to E_Port License Exceeded.) (A1004.0043) (Forcing Domain ID change due to Interoperability setting from old_domain_ID to new_domain_ID.) The local switch has a conflicting domain ID and cannot be automatically reassigned because the domain ID is locked. Change the domain ID of the local switch. A fabric binding configuration was activated that conflicts with the current domain ID assignment. Change the domain ID of the device. Fabric binding failed due to Check the security settings of security incompatibility. the named device. The switch with the specified Add the switch to a group in worldwide name (WWN) is the active security set. not allowed to join the fabric. A fabric binding configuration was activated that conflicts with the current domain ID assignment. Change the domain ID of the named device, and then reconfigure the fabric. An E_Port isolated because all licensed E_Ports are in use. Obtain a license key to license additional E_Ports. The domain ID of the switch is changed due to an interoperability configuration change. The old domain ID does not conform to the range of allowed domain IDs for the new interoperability setting. None 8/20q Fibre Channel Switch event messages reference guide 23