HP StorageWorks 8/40 Brocade Converged Enhanced Ethernet Command Reference v6. - Page 141
Specifies the VLAN number. The range of valid values is 1-3583.
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
show mac access-group 8 show mac access-group Displays the current MAC ACL mapping to interfaces. Synopsis show mac access-group [interface port-channel number | tengigabitethernet slot/port | vlan vlan_id] Operands interface Specifies the interface for which to display the MAC ACL mapping. port-channel number Specifies the port-channel number. The range of valid values is 1-63. tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583. Defaults There are no default configurations for this command. Command EXEC mode Modes Description Use this command to display the current MAC ACL mapping to interfaces. Usage If you do not specify an interface, this command shows the mapping of MAC ACL to all interfaces. Guidelines Examples To display the current MAC ACL mapping for 10 Gbps Ethernet interface 0/1: switch#show mac access-group interface tengigabitethernet 0/1 Interface Te 0/1 Inbound access-list is std_acl To display the current MAC ACL mapping for interface VLAN 100: switch#show mac access-group interface vlan 100 Interface Vl 100 Inbound access-list is ext_acl To display the current MAC ACL mapping for 10 Gbps Ethernet interface 0/7 where there is no ACL applied: switch#show mac access-group interface tengigabitethernet 0/7 Interface Te 0/7 Inbound access-list is not set See Also show running-config, show statistics Converged Enhanced Ethernet Command Reference 123 53-1001347-01