HP StorageWorks 8/40 Brocade Converged Enhanced Ethernet Command Reference v6. - Page 177
Use this command to change an interface's spanning-tree port priority. Use
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
spanning-tree priority 9 spanning-tree priority Changes an interface's spanning-tree port priority. Synopsis spanning-tree priority priority no spanning-tree priority priority Operands priority Specifies the interface priority for the spanning tree. The range of valid values is 0-240. Port priority is in increments of 16. Defaults The default value is 128. Command Interface configuration mode Modes Description Use this command to change an interface's spanning-tree port priority. Use the no spanning-tree priority command to return to the default setting. Usage There are no usage guidelines for this command. Guidelines Examples To configure the port priority to 16: switch(conf-if-te-0/1)#spanning-tree priority 16 See Also spanning-tree cost, show spanning-tree Converged Enhanced Ethernet Command Reference 159 53-1001347-01