HP StorageWorks 8/40 Brocade Converged Enhanced Ethernet Command Reference v6. - Page 224
dot1x timeout re-authperiod, Synopsis, Operands, Defaults, Command, Modes, Description, Usage
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
12 dot1x timeout re-authperiod dot1x timeout re-authperiod Sets the number of seconds between reauthorization attempts. Synopsis dot1x timeout re-authperiod seconds Operands seconds Specifies the seconds between reauthorization attempts. The range of valid values is 1-65535. Defaults The default time is 3600 seconds. Command Interface configuration mode Modes Description Use this command to set the number of seconds between reauthorization attempts. Usage There are no usage guidelines for this command. Guidelines Examples To set 25 seconds as the amount of time between reauthorization attempts: switch(config)#interface tengigabitethernet 0/1 switch(conf-if-te-0/1)#dot1x timeout re-authperiod 25 See Also none 206 Converged Enhanced Ethernet Command Reference 53-1001347-01