HP StorageWorks 8/8 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001 - Page 35
Protected Extensible Authentication Protocol requires Fabric OS
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
aaaConfig 2 -s secret Specifies a common secret between the switch and the RADIUS server. The secret must be between 8 and 40 characters long. This option is valid only with the -conf radius option, and it is optional. The default value is sharedsecret. -a Specifies the remote authentication protocol for the RADIUS server. This operand is valid only with the -conf radius option, and it is optional. The default value for this operand is CHAP. Valid protocols are one of the following: pap Password Authentication Protocol chap Challenge-Handshake Authentication Protocol peap-mschapv2 Protected Extensible Authentication Protocol (requires Fabric OS v5.3.0 or later) --remove server The distinction between protocols is only applicable to the packets between a system and the RADIUS server. Between the user and system, passwords are always used. Removes the specified server from the configuration. The server must match one of the IP addresses or the names shown in the current configuration. The following operand is required: -conf radius|ldap Specifies the server configuration as either RADIUS or LDAP. If the server is enabled, the command does not allow the last server to be removed from the configuration list. RADIUS or LDAP must first be disabled before the last server of the specified type may be removed. --move server option Moves the specified server from the current position in a RADIUS or LDAP configuration list to the specified position. If the specified position is the same as the current position, no change takes place. Valid options are: -conf radius|ldap Specifies the server configuration as either RADIUS or LDAP. This operand is required. to_position Specifies the new position for the server. The value for to_position is an integer, and must be within the range of server positions in the current configuration. Use the --show option to determine current server positions. This operand is required. --authspec "aaa1[;aaa2" [-backup] Replaces the configuration with the specified AAA service. Each service can be specified only once in the list, for example, "radius; local; radius" is invalid. No edit option is provided. The --authspec option takes as an argument a semicolon-separated list of AAA services. Services must be enclosed in double quotation marks. The following AAA services and service pairs are valid: "local" Default setting. Authenticates the user against the local database only. If the password does not match or the user is not defined, the login fails. Fabric OS Command Reference 7 53-1001186-01