HP StorageWorks 8/8 Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001 - Page 755
command. In Virtual Fabric mode, the User Ports Disabled
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 755 highlights
slotShow 2 POWERING UP The blade is present and powering on. LOADING The blade is present, powered on, and loading the initial configuration. DIAG RUNNING POST1 The blade is present, powered on, and running the POST (power-on self-test). DIAG RUNNING POST2 The blade is present, powered on, and running the pre-boot power on self tests. INITIALIZING The blade is present, powered on, and initializing hardware components. ENABLED The blade is on and fully enabled. ENABLED (User Ports Disabled) The blade is on but the external ports have been disabled with the bladeDisable command. In Virtual Fabric mode, the "User Ports Disabled" information is suppressed, because ports may not physically belong to the switch. ENABLED (SAS Virtualization Disabled) The blade is on, but due to an incompatibility between the FOS image and the SAS or Application image, the SAS Virtualizaion services are disabled. Only applies to the FA4-18 blade. DISABLED The blade is powered on but disabled. FAULTY The blade is faulty because an error was detected. UNKNOWN The blade is inserted but its state cannot be determined. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands This command supports the following operands: -p In addition to the basic slot status view, displays the following information about power consumption: • Direct current (DC) power consumption for each Blade in Watts. • Total alternate current (AC) Power Consumption in Watts. • AC efficiency, as a percentage of total and BTU. • Power efficiency in Watts/port and Watts/Gb. -m In addition to the basic slot status view, displays the Brocade model name for each blade. Examples To display a basic view of all slots and their status: switch:user> slotshow Slot Blade Type ID Status 1 SW BLADE 51 FAULTY 2 SW BLADE 51 DISABLED 3 SW BLADE 55 ENABLED(User Ports Disabled) 4 SW BLADE 51 DIAG RUNNING POST2 Fabric OS Command Reference 727 53-1001186-01