HP StorageWorks Disk System 2110 HP StorageWorks Disk System 2100/2110 User's - Page 8
Components of the Disk System, Front Panel, Disk Module LEDs, System Power LED
View all HP StorageWorks Disk System 2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 HP StorageWorks Disk System 2100 / 2110 Components of the Disk System Front Panel The disk modules can be accessed from the front of the disk system. It can accept up to 4 low profile disk drives. If your storage system contains less than 4 disk modules, the remaining empty slots contain filler panels. These filler panels (part number A6198-60002) ensure that the proper cooling is maintained within the storage system. Remove filler panels only when a disk module is added to the system. Disk Module LEDs Each disk module has two LEDs: an amber LED on the top (see Figure 1) and a green LED on the bottom. The amber LED is not operational. The green LED provides disk module status information as listed in Table 6. FIGURE 1 Disk Module LEDs Amber LED (not used) Green LED Disk Module LEDs TABLE 1 Disk LED Activity Definitions LED Activity Indication Blinking Disk activity On solid for Bus reset approximately 1 second Off Disk is idle or off System Power LED The System Power LED (see Figure 2) gives diagnostic information about the disk system operation. Refer to Table 2 on page 9 for more information.