HP StorageWorks Modular Smart Array 1000 HP StorageWorks 1000 Modular Smart Ar - Page 10

Step Description (continued) Check 12 Verify that both MSA controllers are running the same version of firmware, and F examine the status of the MSA, the storage, and the connections. From the MSA CLI, enter the following commands: show version-Displays MSA version information including MSA firmware and MSA hardware build. show disks-Displays physical disk information including disk number, enclosure box and bay number, enclosure bus number and ID, physical disk size, and Logical Units (LUNs) to which the disk is assigned. show units-Displays LUN information including LUN name, status, included physical disks and spares, RAID level and capacity. show this_controller-Displays controller information including serial number, hardware build, and redundancy mode. show other_controller-Displays controller information for the controller with no serial connection, including serial number, hardware build, and redundancy mode. show connections-Displays connection information including the WWPN of each HBA connected to the MSA and the host mode (or profile) assigned to the connection. show acl-Displays the Access Control List including the WWPN of the HBAs and the accessible LUNs. NOTE: The displayed information shows the MSA operating in a redundant mode. For detailed information about the CLI, see the HP StorageWorks Modular Smart Array 1000/1500 Command Line Interface User Guide. 10