HP StorageWorks SB40c HP StorageWorks SB40c Storage Blade Maintenance and Serv - Page 35
Specifications, Environmental specifications, Storage blade specifications
![]() |
View all HP StorageWorks SB40c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
7 Specifications Environmental specifications Specification Value Temperature range Operating 10º C to 35º C (50º F to 95º F) Maximum rate of change is 10º C/hr (50º F/hr) Storage -30°C to 60°C (-22°F to 140°F) Maximum rate of change is 20º C/hr (68º F/hr) Relative humidity Operating 10% to 90% relative humidity (Rh), 28º C (82.4º F) maximum wet bulb temperature, non-condensing Storage 5% to 95% relative humidity (Rh), 38.7º C (101.66º F) maximum wet bulb temperature, non-condensing. Altitude ‡ Operating 3048 m (10,000 ft) This value may be limited by the type and number of options installed. Non-operating 9144 m (30, 000 ft) Temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. The upper limit may be limited by the type and number of options installed. Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa. ‡ Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Storage blade specifications Specification Height Value 5.56 cm (2.19 in) HP StorageWorks SB40c Storage Blade 35
![](/manual_guide/products/hewlettpackard-storageworks-sb40c-hp-storageworks-sb40c-storage-blade-maintenance-service-guide-433903002-2009-6bc57ce/35.png)