HP StorageWorks XP12000 HP StorageWorks XP Disk Array Configuration Guide: HP- - Page 25
Creating the file systems
![]() |
View all HP StorageWorks XP12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. Use the lvdisplay command to verify that the logical volume was created correctly. Example # lvdisplay /dev/vg06/lvol1 - - - Logical volume - - - LV Name /dev/vg06/lvol1 VG Name /dev/vg06 LV Permission read/write LV Status available/syncd Mirror copies 0 Consistency Recovery MWC Schedule parallel LV Size (Mbytes) 2344 Current LE 586 Allocated PE 586 Stripes 0 Stripe Size (Kbytes) 0 Bad block on Allocation strict 4. Repeat above steps for each logical volume to be created. You can create only one logical volume at a time. However, you can verify multiple logical volumes at a time. Creating the file systems Create the file system for each new logical volume on the disk array. The default file system types are: • HP-UX OS version 10.20 = hfs or vxfs, depending on entry in the /etc/defaults/fs file. • HP-UX OS version 11.0 = vxfs • HP-UX OS version 11.i = vxfs XP Disk Array Configuration Guide for HP-UX 25
![](/manual_guide/products/hewlettpackard-storageworks-xp10000-hp-storageworks-xp-disk-array-configuration-guide-hpux-a595196083-2010-fd6d574/25.png)