HP Superdome SX2000 Installation Guide, Sixth Edition - HP Integrity Superdome - Page 25
Unpacking the PDCA, Returning Equipment, Repackaging
View all HP Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Unpacking the PDCA At least one PDCA ships with the system. In some cases, the customer might order two PDCAs, the second to be used as a backup power source. Unpack the PDCA and ensure it has the power cord option for installation. Several power cord options are available for the PDCAs. Only options 6 and 7 are currently available in new system configurations (Table 1-1 (page 25)). Table 1-2 (page 25) details options 6 and 7. Table 1-1 Available Power Options Option Source Type Source Voltage (Nominal) PDCA Required Input Current Per Power Receptacle Required Phase 200 to 240 V ac1 6 3-phase Voltage range 200 to 4-wire 44 A maximum per Connector and plug provided 240 V ac, phase with a 2.5 m (8.2 feet) power phase-to-phase, 50 Hz cable. An electrician must / 60 Hz hardwire receptacle to 60 A site power. 7 3-phase Voltage range 200 to 5-wire 24 A maximum per Connector and plug provided 240 V ac, phase with a 2.5 m (8.2 feet) power phase-to-neutral, 50 Hz cable. An electrician must / 60 Hz hardwire receptacle to 32 A site power. 1 A dedicated branch circuit is required for each PDCA installed. Table 1-2 Power Cord Option 6 and 7 Details PDCA Part Number Attached Power Cord Attached Plug A5201-69023 (Option 6) OLFLEX 190 (PN 600804) is a 2.5 meter multiconductor, 600 V, 90˚C, UL and CSA approved, oil resistant flexible cable. (8 AWG 60 A capacity) Mennekes ME 460P9 (60 A capacity) A5201-69024 (Option 7) H07RN-F (OLFLEX PN 1600130) is a 2.5 meter heavy-duty neoprene jacketed harmonized European flexible cable. (4 mm2 32 A capacity) Mennekes ME 532P6-14 (32 A capacity) Receptacle Required Mennekes ME 460R9 (60 A capacity) Mennekes ME 532R6-1500 (32 A capacity) Returning Equipment If the equipment is damaged, use the original packing material to repackage the cabinet for shipment. If the packing material is not available, contact the local HP Sales and Support Office regarding shipment. Before shipping, place a tag on the container or equipment to identify the owner and the service to be performed. Include the equipment model number and the full serial number, if applicable. The model number and the full serial number are printed on the system information labels located at the bottom front of the cabinet. WARNING! Do not attempt to push the loaded cabinet up the ramp onto the pallet. Three people are required to push the cabinet up the ramp and position it on the pallet. Inspect the condition of the loading and unloading ramp before use. Repackaging To repackage the cabinet, follow these steps: 1. Assemble the HP packing materials that came with the cabinet. 2. Carefully roll the cabinet up the ramp. 3. Attach the pallet mounting brackets to the pallet and the cabinet. Unpacking and Inspecting the System 25