HP Surestore 600fx Adding 2 Drives to the C1107 Series Jukebox - C1158-90001 - Page 6

Installing the 2-Drive Upgrade Note There are 2 drives installed in each drive enclosure. If you are upgrading a 1/2-capacity configuration jukebox that has 4 drives, you will currently be using the top 2 drive enclosures, and will add 2 drives to the drive enclosure that is 3rd from the top. If you are upgrading a 1/2-capacity configuration jukebox with 6 drives, you must add the capacity upgrade (C1159F/G/ H, which includes 3 empty drive enclosures) at the same time that you add the drive upgrade. If you are adding two drives to a full configuration with 6, or 10 drives, install the drives in the first available empty drive enclosure from the top. DO NOT skip drive mounting locations. See the right-hand box in Figure 1. If you are upgrading to a 10-drive unit, move the drives at position #3 down to position #5, move the fan at position #5 up to position #3, and add the new drives in position #6. Enclosure #3 must not contain drives. Positioning the drives in this way in a 10-drive upgrade matches the way 10-drive jukeboxes ship from the factory after February, 1998. This configuration enables future connection into a highavailability environment if requested by the customer. See the left-hand box in Figure 1. 6