HP Surestore Tape Library Model 4/40 HP Surestore Tape Library User's - Page 163
Replacing a Card, Upgrading Firmware, Configuring the Library for Fibre Channel
View all HP Surestore Tape Library Model 4/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Replacing a Card 1. Align the edges of the replacement card with the card slot. 2. Gently push on the lower third of the replacement card, inserting it into the library until the card is flush with the library. This will help ensure that the backplane pins are optimally aligned. 3. Tighten the thumbscrews with a flat-blade screwdriver. 4. Reconnect external cables. 5. Power on the library. 6. Download new firmware (see Upgrading Firmware on page 176). 7. If installing Fibre Channel cards for the first time, configure the library from the front panel. See Configuring the Library for Fibre Channel on page 102. Chapter 5 Chapter 5 Removing and Replacing Cards 161
Chapter 5
Removing and Replacing Cards
161
Chapter 5
Replacing a Card
1.
Align the edges of the replacement card with the card slot.
2.
Gently push on the lower third of the replacement card, inserting it into the
library until the card is flush with the library. This will help ensure that the
backplane pins are optimally aligned.
3.
Tighten the thumbscrews with a flat-blade screwdriver.
4. Reconnect external cables.
5.
Power on the library.
6.
Download new firmware (see
Upgrading Firmware
on page 176).
7.
If installing Fibre Channel cards for the first time, configure the library
from the front panel. See
Configuring the Library for Fibre Channel
on
page 102.