HP Vectra VEi8 HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter
HP Vectra VEi8 Manual
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Vectra VEi8 manual content summary:
- HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 1
Intel EtherExpress PRO 10+ ISA Ethernet Adapter Installation Guide - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 2
of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. MMXTM is a trademark of Intel Corporation. Pentium® is a registered - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 3
Bios setup and set PnP OS option field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards. ISA cards: • For ISA network adapters, start the configuration tool provided in driver - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 4
settings and boot to applicable OS. 5 Remote boot: 6 Remote boot fails HP tests on Vectra VEi7. 7 Message during boot on VEi8: 8 Message "EtherExpress PRO flash routines disabled. ROM shadowing problem the NIC flash ram. Both must be done. Disabling only the shadowing will not fix the problem. 1 Boot - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 5
General information to read before installing 9 From main menu go to Change adapter configuration > Change "Flash Memory" to Disabled. - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 6
Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 7
Driver Diskette" in the floppy drive and click on "Next" from the Update Device Driver Wizard dialog box. 10 When Windows 95 detects the updated driver required information, contact your network administrator) 17 Client for Microsoft Networks Client for Microsoft Networks Intel EtherExpress[TM] PRO/ - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 8
Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 9
Driver Diskette" in the floppy drive and click on "Next" from the Update Device Driver Wizard dialog box. 10 When Windows 95 detects the updated driver required information, contact your network administrator) 17 Client for Microsoft Networks Client for Microsoft Networks Intel EtherExpress[TM] PRO/ - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 10
NetWare 3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned off, install the - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 11
Driver Diskette" in the floppy drive and click on "Next" from the Update Device Driver Wizard dialog box. 10 When Windows 95 detects the updated driver, Click on "Yes" to set the Preferred Server. (If you do not have the required information, contact your network administrator). 21 Click on "Reboot - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 12
NetWare 4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 5 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned off, install the - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 13
with the Intel EtherExpress drivers disk inserted, set the path to "A:\" and click "OK". 12 Click "OK" to the "Network dialog box to provide your network administrator). 14 Click on "Close" button, and files will copy. 15 When prompted for the file"NETAPI.DLL", set the path to your Windows 95 - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 14
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 15
" at the prompt to shut down and restart your computer for the new settings to take effect. 27 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 28 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 16
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 17
" at the prompt to shut down and restart your computer for the new settings to take effect. 27 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 28 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 18
Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 19
have the required information). 18 At the "Network Services:" prompt, accept default settings and click on "Next". 19 Click on "Next" to continue the network card installation. 20 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 20
Contact your network administrator if you do not have the required information). 33 Click on the "Login" tab and specify your Name and Password to login. 34 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 35 Install the Hewlett-Packard Soft Power - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 21
Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 22
have the required information). 18 At the "Network Services:" prompt, accept default settings and click on "Next". 19 Click on "Next" to continue the network card installation. 20 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 23
Contact your network administrator if you do not have the required information). 33 Click on the "Login" tab and specify your Name and Password to login. 34 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 35 Install the Hewlett-Packard Soft Power - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 24
Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 25
"Control Panel" program group. 10 Click on "YES" in the "Network Settings" dialog box to install Windows NT Networking. 11 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive. 12 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT 3.51 CD) in the dialog-box of the - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 26
Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 27
"Control Panel" program group. 10 Click on "YES" in the "Network Settings" dialog box to install Windows NT Networking. 11 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive. 12 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT 3.51 CD) in the dialog-box of the - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 28
Windows NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 29
"Control Panel" program group. 10 Click on "YES" in the "Network Settings" dialog box to install Windows NT Networking. 11 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive. 12 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT 3.51 CD) in the dialog-box of the - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 30
Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 31
" dialog box, and then insert the Intel driver disk into the floppy drive, and click "OK". 14 Select "Intel EtherExpress[TM] PRO/10 LAN Adapter" in the "Unlisted or Updated Network Adapter" dialog box, and click "OK". 15 Confirm the Interrupt Settings and click "OK". 16 Confirm the Base I/O Port - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 32
4.11 Server system that supports IPX network protocols. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 09 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned off, install - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 33
Board selection. 11 Insert the Intel Pro 10+ driver disk into the floppy drive. 12 Type the path "A:\DOS" when prompted and press "Enter". 13 Select "Intel EtherExpress Pro/10 LAN Adapter" and hit "Enter". 14 Accept the default network board settings and press "F10" to save it. 15 Select option - HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 34
- HP Vectra VEi8 | HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 35
Intel EtherExpress PRO 10+ ISA
Ethernet Adapter
Installation Guide