HP Vectra VEi8 HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 10

3 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Microsoft Windows 95 SR2.5 3 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Microsoft Windows 95 SR2.5 Connecting to a Novell Netware 3.12 Server Requirements • HP Vectra with Windows 95 SR2.5. • Intel EtherExpress PRO 10+ ISA Ethernet card and drivers disk version 3.50. • Driver File: PROW95.VXD, version 1.43a • Microsoft Windows 95 SR2.5 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot. 2 Connect network cable media to the EtherExpress PRO 10+ card. 3 Power on the machine and start Windows 95SR2.5 in MS-DOS mode. 4 Insert the EtherExpress PRO 10+ driver disk, "PRO/10+ ISA LAN Adapter Configuration and Driver Diskette" and execute "SOFTSET2.EXE". 5 Select "View Adapter Configuration" and verify the resource settings listed above under the heading "Device Configuration". 6 Save any required changes and exit. 7 Remove the Intel driver diskette from the floppy drive and restart the system. 8 Windows 95SR2.5 will automatically recognize the Intel ethernet card as "Intel EtherExpress PRO/10 (PnP Enabled)".