HP Vectra VEi8 HP Vectra VEi7, Intel EtherExpress PRO 10+ ISA Ethernet Adapter - Page 8
Microsoft Windows 95, SR2.5, Connecting to a, Windows NT 4.0 Server, Requirements, Device
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Microsoft Windows 95 SR2.5 2 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows 95 SR2.5. • Intel EtherExpress PRO 10+ ISA Ethernet card and driver disk version 3.50. • Driver File: PROW95.VXD, version 1.43a • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot. 2 Connect network cable media to the EtherExpress PRO 10+ card. 3 Power on the machine and start Windows 95SR2.5 in MS-DOS mode. 4 Insert the EtherExpress PRO 10+ driver disk, "PRO/10+ ISA LAN Adapter Configuration and Driver Diskette" and execute "SOFTSET2.EXE". 5 Select "View Adapter Configuration" and verify the resource settings listed above under the heading "Device Configuration". 6 Save any required changes and exit. 7 Remove the Intel driver diskette from the floppy drive and restart the system. 8 Windows 95SR2.5 will automatically recognize the Intel ethernet card as "Intel EtherExpress PRO/10 (PnP Enabled)".