HP Vectra VEi8 HP Vectra VEi7, Intel EtherExpress PRO 100B-TX PCI Ethernet Ada - Page 21
Insert the Intel EtherExpress PRO/100B LAN Adapter Configuration
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
8 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the "Network Neighborhood" icon and select "Properties". 10 Click on "Yes" when prompted to install Windows NT Networking. 11 Select "Wired to the network" and click on "Next". 12 Click on the "Select from list..." button and then the "Have Disk..." button. 13 Insert the Intel "EtherExpress PRO/100B LAN Adapter Configuration and Drivers Diskette" disk into the floppy drive. 14 Set the path to "A:\" in the dialog-box and click on "OK". 15 Choose by highlighting the "Intel EtherExpress PRO/100B PCI Adapter [TX or T4]" and click on "OK". 16 With "Intel EtherExpress PRO/100B PCI Adapter [TX or T4]" listed in the "Network Adapters" window, click on "Next". 17 Select the applicable network protocols and click on "Next" (Contact your network administrator if you do not have the required information). 18 At the "Network Services:" prompt, accept default settings and click on "Next". 19 Click on "Next" to continue the network card installation. 20 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and click on "OK". 21 Click on "OK" at the "Intel ProSET" dialog box to accept the configuration. 22 At the "Show Bindings for:" prompt, accept the default settings and click on "Next". 23 Click on "Next" to start the network. 24 Specify your Computer Name, Workgroup or Domain (Contact your network administrator if you do not have the required information) and click on "Next". 25 Click on "Finish" to complete the installation. 26 Select "Yes" at the prompt to shut down and restart your computer for the new settings to take effect. 27 Insert the "Novell IntranetWare Client v.4.11" CD in the CD-ROM and execute "Setupnw.exe". 28 Click on "Continue" to continue with the Novell IntranetWare Client installation.