HP Vectra VEi8 HP Vectra VEi7, Intel EtherExpress PRO 100B-TX PCI Ethernet Ada - Page 25
Microsoft Windows NT, 51 Workstation, Connecting to a, Windows NT 4.0 Server, Requirements, Device
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 3.51 Workstation 10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 3.51 Workstation. • Intel EtherExpress PRO 100B-TX PCI Ethernet adapter and driver disk version 2.51. • Driver File: E100B.SYS, version 2.24 • Microsoft Windows NT 3.51 Workstation media. • Microsoft Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1020 Vectra VEi7 03 DCE0 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 100B PCI adapter card into a PCI slot. 2 Connect network cable media to the Intel EtherExpress PRO 100B card. 3 Power on the machine and start in MS-DOS mode. 4 Insert the Intel driver disk, "EtherExpress PRO/100B LAN Adapter Configuration and Drivers Diskette" and execute "SETUP.EXE". 5 Select "VIEW ADAPTER SETTINGS" and verify the resource settings listed above under the heading "Device Configuration". 6 If changes are required, save those changes and exit. 7 Remove the Intel Software driver diskette and restart the system. 8 Log into Windows NT with administrator privileges.