HP Workstation x1000 hp workstations general - 18.1in flat panel color monitor - Page 13
ladoga.bk : ladga-us.fb4, Friday, January 15, 1999, 28 PM
View all HP Workstation x1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ladoga.bk : ladga-us.fb4 Page 11 Friday, January 15, 1999 3:28 PM HP 18.1" LCD Color Monitor User's Guide Configuring Your Monitor Selecting Video Input The rear of your monitor has two video input connectors to connect one or two computers (see "Connecting Two Computers, on page 5"). The Video Input LEDs located on the front panel of the monitor indicate which connector is receiving input. Use either auto or manual selection to select the appropriate input option. Auto Selection When you first connect your computer to the monitor, the monitor automatically selects one of the following combinations, depending on which connector is receiving input. 1 AUTO 2 1 AUTO 2 If two operational computers are connected, the monitor automatically selects the computer that has input priority (see "Selecting Input Priority" on page 12). If the monitor detects no input from the computer with priority, it automatically searches for a signal from the second computer. Manual Selection To manually select an input channel, use the video input button underneath the front panel of the monitor. located If you want to receive a signal from a computer connected to following. 1 AUTO 2 1 select the If you want to receive a signal from a computer connected to following: 1 AUTO 2 2 select the If two operational computers are connected, the monitor is only able to detect input from the computer connected to the connector selected. NOTE To return to auto selection at any time select AUTO. English 11