HP Workstation x1000 hp workstations general - 18.1in flat panel color monitor - Page 14

ladoga.bk : ladga-us.fb4 Page 12 Friday, January 15, 1999 3:28 PM HP 18.1" LCD Color Monitor User's Guide Configuring Your Monitor Selecting Input Priority When your monitor is connected to two computers, you will need to give priority to one computer. This computer is selected every time you switch on your monitor and when using auto selection (see "Auto Selection" on page 11). To choose which computer has priority: 1 Select 1 : 2 from the main menu, then press sub menu. to enter the INPUT PRIORITY NOTE 2 Select INPUT 1 or INPUT 2 using the adjustment control, then press to save your selection and return to the OSD main menu. The displayed image will disappear for a few seconds. The message Auto Video Input Selection Priority to 1 (or 2 depending on your selection) appears while the monitor makes your selection. Input 1 and Input 2 correspond to connectors 1 and 2 on the rear of the monitor. Obtaining Information To obtain information about your monitor, select one of the following main menu items: Menu Item Select to... SERIAL NUMBER Display the serial number of your monitor BACKLIGHT TIME MODE INFO Display the estimated life span of the monitor's backlight Display the video mode currently in use1 Display the preset modes and user modes available2 1. Contains a record of any adjustments that the user makes in the main menu system. 2. Standard configurations pre-loaded at the factory. 12 English