HP Workstation x2100 hp workstations general - Network administration guide fo - Page 39
Parallel Transferring ODI Driver with DOS Shell, NetWare Directory Services
View all HP Workstation x2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
NOTE 2 Installing Novell NetWare Drivers Parallel Transferring ODI DOS Client Driver Parallel Transferring ODI Driver with DOS Shell To install the ODI driver for DOS, follow the instructions below: 1 To begin the installation you require the Novell DOS Shell installation diskette labeled 'WSGEN' and the LAN Disk. 2 Create a directory on the DOS boot drive (for example C) for the HP and NetWare files using the following commands at the DOS prompt: C: MKDIR C:\NOVELL 3 Copy the DOS ODI Driver and NET.CFG File. For example, if the LAN Disk is in Drive A use the following commands: COPY A:\NOVELL\LAPPCLNT\PCLAPP.COM C:\NOVELL COPY A:\NOVELL\LAPPCLNT\NET.CFG C:\NOVELL The contents of the NET.CFG file are given below: LINK DRIVER PCLAPP BUSTYPE PCI1 FRAME ETHERNET_802.3 LED2 90 4 Copy the following files from the Novell installation diskette labeled "WSGEN" to the C:\NOVELL directory: LSL.COM (must be version 2.11 or later) IPXODI.COM (must be version 2.20 or later) NETX.EXE These files are either in the root or the DOSODI directory on the NetWare diskette. 5 The installation of the Parallel Transferring DOS ODI driver and NetWare client software is complete. Refer to page 40 for information on how to start a Parallel Transferring NetWare client. The DOS Shell can only access a server's bindery. If you want access any enhanced NetWare Directory Services, you should use the DOS Requester (VLM). English 39