HP Z200 HP SATA/SAS Hard Drive and Solid State Drive Installation - Page 1
HP Z200 - Small Form Factor Workstation Manual
View all HP Z200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP SATA/SAS hard drive and Solid State Drive installation This document describes how to install Serial ATA (SATA) and Serial Attached SCSI (SAS) hard drives or Solid State Drives (SSD) in an internal hard drive bay. Throughout this document, all references to hard drives include solid state drives. Kit contents ● A SATA or SAS hard drive or Solid State Drive (SSD) ● Multiple SATA interface cables (each of a different length and with different connector orientation combinations) ● SAS-to-SATA interface adapter (included with SAS hard drives) ● Four 6-32 guide screws ● Installation instructions (this document) ● Warranty information Tools required The following may be required to install the hard drive: ● T-15 Torx screwdriver or flat-bladed screwdriver Your responsibilities You are responsible for determining whether the product is appropriate for your use and will interface with other equipment without malfunction or damage. You are also responsible for backing up data before installing any product and for regularly backing up data after installing the product. HP is not liable for any damage to equipment or data loss resulting from the use of any product. To determine the compatibility of this product with your computer or workstation, view QuickSpecs at http://www.hp.com/go/productbulletin. © 2006-2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, XP , and Windows Vista are U.S. registered trademarks of Microsoft Corporation. Printed in the U.S. ENWW Kit contents 1