HP Z600 HP Z Series Workstations - HP Optical Bay Hard Drive Bracket Installat - Page 8

Step 4-Reassembling the workstation 1. Reinstall the front bezel, if applicable. 2. Reinstall the card support, if applicable. 3. Reinstall the airflow guide, if applicable. 4. Reinstall the side access panel. 5. Reconnect power to the workstation and all external devices. 6. Restore power to the workstation and all external devices. Step 5-Setting up the operating system When powering up the workstation after installation, a new hard drive identifies itself as un-initialized storage. Consult the operating system documentation for information about how to set up the new drive. If hard drives are connected to a RAID device, see the RAID documentation for additional setup information. Japanese 日本語 This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then select your workstation product and select Japanese from the drop down Manual Language menu http://www.hp.com/support/workstation_manuals Manual Language Japanese 8 HP Optical Bay Hard Drive Bracket ENWW