HP Z6100ps HP Designjet Z6100 Printer Series - Setup Poster (60 inch) - Page 2
Remove the packaging, Assemble the stand
UPC - 882780990135
View all HP Z6100ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Remove the packaging Steps 1 to 4. This task requires 2 people. Time required is 5 minutes. 5' x2 Boxes required 1 Remove the 4 upper plastic handles from the sides of the box (two each side), and then carefully remove the two side lids vertically. x4 2 Carefully cut the straps around the boxes. Make sure that the boxes don't fall when the straps are cut. 3 Remove the boxes shown. 4 Remove the boxes shown. x2 Assemble the stand Steps 5 to 24. This task requires 2 people. Time required is 20 minutes. 20' x2 Box required 5 Open the box that contains the stand. Remove the two boxes marked L and R. Place them on the floor as shown. Page 2 6 Lower the left side of the cross-brace onto the box marked L and the right side of the cross-brace onto the box marked R. x2