HP d640 HP D640 High-Volume Printer - 3000-Sheet HCO Installation and User Man - Page 7
Removing the HCO
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Step 3 Grasp the HCO box and set it upright. Then, remove the cardboard on top of the HCO. The HCO's legs and casters should rest on the bottom of the box. Step 4 Grasp the top and bottom of the HCO and roll it slowly out of the box. Make sure the HCO doesn't fall back as you roll it from the box. See Figure 3. HCO Figure 3 Removing the HCO CAUTION When you unpack and install the HCO, do not use the paper input guide on the back of the HCO to move or lift the HCO. You might damage the guide. Step 5 Remove the plastic bag and all the packing tape from the HCO and set the packing material aside. Don't forget to open the HCO door and remove the tape on the paper guides inside the HCO. Otherwise, paper jams will occur. It's a good idea to save the packing material in case you need to ship the HCO in the future. Chapter 1: Introduction 3