HP rp5400 Carrier Grade Addendum - rp5400 Series of Servers - Page 49
Step 2., Side Cover with Captive Screws,
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Removal and Replace Procedures Removing and Installing the Diffuser Card Step 2. Remove the side cover. The Side Cover protects the side service bay. The power to the server does not have to be off to remove the side cover. However, operation of the server without the side cover in place can make it susceptible to cooling and EMI problems. Loosen the captive T-15 screws that hold the side cover in place, then grasp the strap handle and pull the cover away from the server. Figure 2-6 shows the side cover with captive screw locations. Figure 2-6 Side Cover with Captive Screws Chapter 2 37
Chapter 2
Removal and Replace Procedures
Removing and Installing the Diffuser Card
37
Step 2.
Remove the side cover.
The Side Cover protects the side service bay. The power to the server does not have to be off to
remove the side cover. However, operation of the server without the side cover in place can make it
susceptible to cooling and EMI problems.
Loosen the captive T-15 screws that hold the side cover in place, then grasp the strap handle and
pull the cover away from the server.
Figure 2-6 shows the side cover with captive screw locations.
Figure 2-6
Side Cover with Captive Screws