HP rp5400 Carrier Grade Addendum - rp5400 Series of Servers - Page 52
Removing and Installing the Diffuser Card, Step 6.
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Removal and Replace Procedures Removing and Installing the Diffuser Card Step 6. Insert the Server from the Front To return the server into the rack, perform the following steps: 1. Release the rail clips on each side of the server by pressing them. 2. Push the server into the rack until it stops. 3. Reinstall the four T-25 screws that fasten the server to the rack. 4. Reinstall the front Bezel. 40 Chapter 2
Chapter 2
Removal and Replace Procedures
Removing and Installing the Diffuser Card
40
Step 6.
Insert the Server from the Front
To return the server into the rack, perform the following steps:
1.
Release the rail clips on each side of the server by pressing them.
2.
Push the server into the rack until it stops.
3.
Reinstall the four T-25 screws that fasten the server to the rack.
4.
Reinstall the front Bezel.