HP rp7400 Hardware Manual - rp7400 - Page 143
Guardian Service Processor Firmware Update
View all HP rp7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Guardian Service Processor Firmware Update Guardian Service Processor Firmware Update This section details the procedures to update the Guardian Service Processor (GSP) firmware. Before starting the update procedures, there are some pre-update activities to check or perform. • The update files exist on an FTP server accessible to the GSP LAN. • The GSP LAN has been configured (using the LC command). • The GSP internal port is configured (refer to Accessing GSP Internal Port for procedures). An update file set consists of three files (APPLICATION.ROM, BOOTSTRAP.ROM, and upgrade.cnf). To update the firmware on the GSP, perform the following steps: 1. Go into the GSP using the ctrl+b command from the local console keyboard, through the local port, or from an HP-UX server (through GSP internal port), use the cu command . 2. At the GSP prompt (GSP>) type he, to display the help menu, as shown: GSP> he HE Hardware Revision X Firmware Revision A.XX.XX July 16 1999, 17:19:31 AC: Alert delay configuration AR: Config. automatic system restart CA: Confiure serial port parameters CE: Log repair info in history buffer CO: Return to console mode DC: Default configuration DI: Disconnect remote or LAN console DR: Disable remote or LAN console ER: Enable remote or LAN console HE: Display the available commands IT: Modify GSP inactivity timeouts LC: Configure LAN console LS: Display LAN console status MR: Modem reset PC: Remote power control PS: Power management module status RS: System reset through RST signal SE: Activate a system session SL: Display SPU status log SO: Security options & access control SS: System Processor status TC: System reset through INIT signal TE: Send a message to other terminals VFP: Activates alert log display WHO: Display a list of GSP connected users XD: GSP diagnostics and reset XU: Upgrade the GSP firmware Where: X is the current hardware revision, and A.XX.XX is the current firmware revision. 3. Select the GSP command XU. This command activates the upgrade mode. CAUTION All connections will be closed, the network will be stopped, the sessions will be aborted and the modem connection will be dropped when the XU command is executed. GSP> xu xu This command activates the upgrade mode. All connections will be closed, the network will be stopped, the sessions will be aborted and the modem connection will be dropped. Please confirm your intention to activate the upgrade mode (Y/[N]: y Enter source system IP address: 192.001.11.92 (example only) Enter file path: /directory/filename (example only) Do you wish to use the default login: anonymous/[email protected] (Y/[N]): y -> GSP firmware upgrade in progress -> GSP firmware upgrade complete - GSP will now reset 141