HP rp7400 Hardware Manual - rp7400 - Page 97
Core I/O Connections:Indicators, occurred on the 10BASE-T LAN Console LAN.
View all HP rp7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Core I/O Connections and Indicators Core I/O Connections and Indicators The following paragraphs describe the operator indicators and Core I/O connections at the rear of the rp7400. 1. (Green) Core I/O board Power LED - When lit indicates that the Core I/O board has DC power available. 2. (Green) Guardian Service Processor Power LED - When lit indicates that the Guardian Service Processor has DC power available. 3. (Red) Failed Self-Test LED - When lit, indicates that one or more power-up self tests has failed. 4. (Amber) 10BASE-T Console LAN Collision LED - When lit, indicates that a data packet collision has occurred on the 10BASE-T LAN Console LAN. 5. (Green) 10BASE-T Console LAN Link OK LED - When lit, indicates that the 10BASE-T Console LAN Link status is OK. 6. (Green) 10BASE-T Console LAN Receive LED - When lit, indicates that a data packet has been received over the 10BASE-T Console LAN. 7. (Green) 10BASE-T Console LAN Transmit LED - When lit, indicates that a data packet has been transmitted over the 10BASE-T Console LAN. 8. (Green) 10BASE-T/100BASE-T Mode LED - When lit, indicates that the LAN is in 100 Mbps Mode. When unlit, indicates that the LAN is in 10 Mbps Mode. 9. (Amber) 10BASE-T/100 BASE-T LAN Collision LED - When lit, indicates that a data packet collision has occurred on the 10BASE-T/100BASE-T LAN. 10. (Green) 10BASE-T/100BASE-T LAN Link OK LED - When lit, indicates that the 10BASE-T/100BASE-T LAN Link status is OK. 11. (Green) 10BASE-T/100 BASE-T LAN Receive LED - When lit, indicates that a data packet has been received over the 10BASE-T/100BASE-T LAN. 12. (Green) 10BASE-T/100 BASE-T LAN Transmit LED - When lit, indicates that a data packet has been transmitted over the 10BASE-T/100BASE-T LAN. 13. (Green) Differential Sense (Diffsens) LED - When Lit, indicates that the external SCSI bus is in Low Voltage Differential mode. When Unlit indicates the external SCSI bus is in Single-Ended mode. 14. (Green) Terminator Power (Termpower) LED - When Lit, indicates that SCSI terminator power is being supplied by the rp7400. When unlit, indicates that SCSI terminator power is being supplied by the external SCSI device. 97