HP rp7440 Site Preparation Guide, Fourth Edition - HP Integrity rx7640 and HP - Page 32
Environmental Specifications, Temperature and Humidity, Operating Environment
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
load. This number can safely be used to compute thermal loads and power consumption for the system under all conditions. Environmental Specifications This section provides the environmental, power dissipation, noise emission, and airflow specifications for the server. Temperature and Humidity The cabinet is actively cooled using forced convection in a Class C1-modified environment. The recommended humidity level for Class C1 is 40 to 55% relative humidity (RH). Operating Environment The system is designed to run continuously and meet reliability goals in an ambient temperature of 5° to 35° C at sea level. The maximum allowable temperature is derated 1° C per 1,000 feet of elevation above 3,000 feet above sea level up to 25° C at 10,000 feet. For optimum reliability and performance, the recommended operating range is 20° to 25° C. This meets or exceeds the requirements for Class 2 in the corporate and ASHRAE standard. See Table 2-8 (page 32) for an example of the ASHRAE thermal report. Table 2-8 Example ASHRAE Thermal Report Description Minimum configuration Condition Voltage 208 Volts Typical Heat Release Watts 670 Airflow, nominal cfm 960 Airflow, maximum at 35° C (m3/hr) 1631 Weight lb kg 192.2 87.4 Over System Dimensions (W x D x H) Inches h=17.29 w=17.50 d=30.00 mm 439.17 444.50 762.00 Full configuration 2128 960 1631 220 100 h=17.29 w=17.50 d=30.00 439.17 444.50 762.00 Typical configuration 1090 960 1637 N/A N/A h=17.29 w=17.50 d=30.00 439.17 444.50 762.00 ASHRAE class Minimum configuration 1 cell board, 2 CPUs, 2 GB, 1 core I/O card Full configuration 2 cell boards, 8 CPUs, 64 GB, 2 core I/O cards Typical configuration 1 cell board, 4 CPUs, 32 GB, 1 core I/O card, 8 I/O cards, 2 hard drives 32 Server Site Preparation