HP t530 Administrator Guide 5 - Page 153
root/Network/Wireless/Security
View all HP t530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Registry key root/Network/Wireless/Roaming/ longScanInterval root/Network/Wireless/Roaming/roamingNap root/Network/Wireless/Roaming/ roamingThreshold root/Network/Wireless/Roaming/scanInterval root/Network/Wireless/SSID root/Network/Wireless/SSIDHidden root/Network/Wireless/SSIDWhiteList root/Network/Wireless/Security/CACert root/Network/Wireless/Security/EAPFASTPAC root/Network/Wireless/Security/ EAPFASTProvision root/Network/Wireless/Security/Identity root/Network/Wireless/Security/InnerAuth root/Network/Wireless/Security/InnerAuthTTLS root/Network/Wireless/Security/PEAPVersion root/Network/Wireless/Security/Password root/Network/Wireless/Security/PrivateKey root/Network/Wireless/Security/Type root/Network/Wireless/Security/UserCert root/Network/Wireless/Security/Username root/Network/Wireless/Security/WEPAuth root/Network/Wireless/Security/WEPIndex root/Network/Wireless/SubnetMask root/Network/Wireless/UseWirelessProfiles Description Specifies how often, in seconds, to scan for an access point with a stronger signal when the signal strength is above the roaming threshold. The default is 60. Specifies how often, in seconds, the connection sleeps when the wpa_applicant status changes. This helps reduce spurious Wi-Fi events from breaking live connections when roaming occurs. Sets the minimum signal strength, in dBm, allowed before attempting to roam to a stronger access point. Note that this value is negative. Sets how often, in seconds, to scan for a stronger access point when the signal strength is below the roaming threshold. Sets the wireless access point to use via its SSID. Specifies if the SSID of the wireless access point is hidden. Specifies a whitelist for wireless access points. If this registry key's value is not empty, only the SSIDs specified in the value will be shown in the wireless access point scan results. Use a semicolon to separate the SSIDs. Sets the path to CA certificate file. Sets the path to the PAC file for EAP-FAST authentication. Sets the provisioning option for EAP-FAST authentication. Sets the identity or anonymous identity. Sets the PEAP inner authentication protocol. Sets the TTLS inner authentication protocol. Sets the PEAP version. Sets the password. Sets the path to a private key file. This is only used for TLS authentication. Sets the wireless authentication type. Sets the path to a user certificate file. This is only used for TLS authentication. Sets the username. Sets the WEP authentication type. Sets the WEP password index. Sets the subnet mask of the device, such as 255.255.255.0 (for a standard class C subnet). This setting will only take effect when Method is set to Static. If set to 1, the wireless connection is configured in profile mode, which can connect to multiple wireless networks. This is useful for mobile computing. If set to 0, only one configured wireless network can be connected. Network 141