HP t5710 Terminal Emulation User's Guide (XPe) - Page 107
Serial Settings, Serial, Settings, Connection, Data Bits, Space, Input, Output
View all HP t5710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Serial Settings Setup Menus When the terminal is not in WBT mode, this dialog box is displayed by selecting Serial in the Settings menu, or by clicking the Configure... button in the New Connection dialog box when the connection type is set to Serial. Note that the port for serial communications is selected via the New Connection dialog box which is displayed from the File menu. Baud Rate Factory default: 9600 This specifies the transmit and receive baud rates for the port selected for host communications. Parity Factory default: None This option specifies the parity mode for each transmitted character. If the number of Data Bits is 8, set this option to None. Selecting Odd will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an even number, and 0 if the previous 7 bits add up to an odd number. Selecting Even will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up to an odd number, and 0 if the previous 7 bits add up to an even number. Mark parity will set every eighth bit to 1 and Space parity every bit to 0. Flow Control Factory default: Input This option specifies the type of flow control used by the line port to communicate readiness to transmit or receive data from the host. None Input Output - No flow control - XON/XOFF on received data - XON/XOFF on transmitted data 6-47