HP t5710 Terminal Emulation User's Guide (XPe) - Page 183

IBM 3270 Emulation 9019 In Record or Play mode. While the Record/play pause indicator was displayed on the status line you pressed an invalid key (e.g. Play key in Record mode, or Record key in Play mode). Remedy: Press the Reset key. Notice Board Facility Introduction The Notice Board is an area of the display in which copied data can be stored and manipulated. When the Notice Board is enabled (see Notice Board Setup dialog box), pressing the Zoom key will toggle the display between full screen (i.e. the screen currently containing the cursor) and split screen (host screen and Notice Board) mode. The Zoom Settings options in the Notice Board Setup dialog box determine which screen is displayed above the other. When viewing the display, pointers at each end of the dividing line between the two screens indicate which is the host screen. Key Functions The keys used by default for Notice Board functions are shown below together with the equivalent virtual key names which can be used to assign the functions to any key on the keyboard. NB Setup: Zoom: Jump: NB Copy: Copy: 101/102 Key Keyboard Alt + F2 Alt + Page Up Ctrl + Page Up Ctrl + Shift + Page Up Shift + Page Down Virtual Key Names IB_NB_SETUP IB_NB_ZOOM IB_NB_JUMP IB_NB_COPY IB_COPY Copying Screen Data To The Display 1. Position the text cursor at the start of the area to be copied. 2. Press the Copy key to start the Copy function. Note that the status line will display the key functions available. 3. Use the cursor keys to move the text cursor to the diagonally-opposite corner of the display area to be copied. The currently selected area will be highlighted in green. Note that you can toggle the position of the text cursor between the two diagonally-opposite corners of the selected area by pressing the Return key. 10-15