HP t5710 Using Rapport Administrative Software and Altiris Deployment Solution - Page 4

Using Rapport Administrative Software and Altiris Deployment Solution on the Same HP Compaq Thin Client Network 5. Stop the service and click OK. Altiris Deployment Solution Setup Repeat steps 3 through 5 for the Altiris PXE MTFTP Service and Altiris PXE Service. To disable PXE service for Microsoft Windows NT 4.0 Server, perform the following steps: 1. Click on Start > Settings > Control Panel. 2. Double-click Services. 3. Scroll to Altiris PXE Config Service and highlight it. 4. Select Stop on the right side of the window. 5. After the service has stopped, double-click the Altiris PXE Config Service. 6. Select the Disabled option and choose OK. Repeat steps 3 through 6 for the Altiris PXE MTFTP Service and Altiris PXE Service. If installing Altiris Deployment Solution onto an existing Rapport managed subnet, customers must select Custom Install and deselect the Altiris PXE service during installation. Otherwise, the Altiris PXE service will disable the Rapport PXE service. After the Deployment Solution is installed, create a BootWorks Installer Package and deploy it to your Altiris managed clients. Use the steps outlined in the Altiris BootWorks Installation section of this document to create the installer package. 4