HP t5745 Hardware Reference Guide HP t5740/t5745 Thin Clients - Page 13
Removing the Stand
View all HP t5745 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
To install the stand: 1. Turn unit upside down. 2. Locate the slots on the bottom of the unit into which the tabs on the stand fit. 3. Insert the tabs into the slots (1), and then slide the stand about 1.26 cm (1/2 inch) toward the front of the unit until it locks into place (2). Figure 1-7 Installing the stand Removing the Stand To remove the stand: 1. Turn unit upside down. 2. Press the tab (1), and then slide the stand about 1.26 cm (1/2 inch) toward the back of the unit and lift the stand off the unit (2). Figure 1-8 Removing the stand ENWW Removing the Stand 7
To install the stand:
1.
Turn unit upside down.
2.
Locate the slots on the bottom of the unit into which the tabs on the stand fit.
3.
Insert the tabs into the slots (1), and then slide the stand about 1.26 cm (1/2 inch) toward the front
of the unit until it locks into place (2).
Figure 1-7
Installing the stand
Removing the Stand
To remove the stand:
1.
Turn unit upside down.
2.
Press the tab (1), and then slide the stand about 1.26 cm (1/2 inch) toward the back of the unit and
lift the stand off the unit (2).
Figure 1-8
Removing the stand
ENWW
Removing the Stand
7