HP t820 Maintenance & Service Guide t820 Flexible Thin Client - Page 54
Lift the rear of the system board until it clears the chassis, and then remove the system board
View all HP t820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
11. Remove the three remaining Torx T15 screws that secure the system board to the chassis. 12. Slide system board toward the front of the unit until the rear connectors are clear of their slots in the chassis (1). 13. Lift the rear of the system board until it clears the chassis, and then remove the system board from the chassis (2). To install the system board, reverse the removal procedure. NOTE: When replacing the system board, you must also change the chassis serial number in the BIOS. 46 Chapter 4 Removal and replacement procedures
11.
Remove the three remaining Torx T15 screws that secure the system board to the chassis.
12.
Slide system board toward the front of the unit until the rear connectors are clear of their slots in
the chassis
(1)
.
13.
Lift the rear of the system board until it clears the chassis, and then remove the system board from
the chassis
(2)
.
To install the system board, reverse the removal procedure.
NOTE:
When replacing the system board, you must also change the chassis serial number in the
BIOS.
46
Chapter 4
Removal and replacement procedures