HP wp110 HP Wireless Print Server wp110 - (English) Setup Guide - Page 6

connecting the print server, connect the parallel cable, plug in the power cord

Get HP wp110 - 802.11b Wireless Print Server PDF manuals and user guides View all HP wp110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

connecting the print server Before you begin, verify that you have an appropriate IEEE 1284 compliant parallel printer cable to connect the print server to the printer. 1 connect the parallel cable 1. Turn off the printer. 2. Connect the appropriate IEEE 1284 compliant parallel printer cable to the printer and the print server. 3. Turn on the printer. 2 plug in the power cord 1. Plug the small end of the power cord into the print server. 2. Plug the conventional end of the power cord into the power source. Note The print server does not have a power switch. It automatically turns on when the power cord is connected to a power source. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
4
connecting the print server
Before you begin, verify that you have an appropriate IEEE 1284 compliant parallel
printer cable to connect the print server to the printer.
1 connect the parallel cable
1.
Turn off the printer.
2.
Connect the
appropriate
IEEE 1284
compliant parallel printer cable to the
printer and the print server.
3.
Turn on the printer.
2 plug in the power cord
1.
Plug the small end of the power cord
into the print server.
2.
Plug the conventional end of the power
cord into the power source.
Note
The print server does not have a
power switch. It automatically turns on
when the power cord is connected to a
power source.