HP wp110 HP Wireless Print Server wp110 - (English) Setup Guide - Page 7
monitor the LEDs, print a configuration Server Configuration is printed.
View all HP wp110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3 monitor the LEDs 1. Wait until the print server cycles through the start-up sequence and only the Power light remains lit. 2. Allow at least 10 seconds for the print server to retrieve information from the printer. Power light 4 print a configuration page 1. Press and hold the Test button on the back of the print server until the Power and Status lights begin blinking. A Print Server Configuration Page is printed. 2. Save this page for reference. You will need it to configure the print server. Note Printing a Print Server Configuration Page verifies communication between the print server and the printer. This page also provides important information about the print server, its settings, and its current status (see page 12 for more information). 5