Hikvision DS-1005KI User Manual - Page 19
Appendix2: System Upgrade,
![]() |
View all Hikvision DS-1005KI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
User Manual of DS-1005KI Keyboard Chapter 5 Appendix2: System Upgrade Step 1 When the drive is installed, access the keyboard USB with the PC, and it will prompt that device is discovered and auto load the corresponding drive. Make sure the keyboard is in USB keyboard mode before upgrading the device. If the single indicator on the panel does not light, press and hold the Window/Channel button for more than 5 seconds to switch to the USB keyboard mode. Step 2 Search the device. Open the ButtonBoardDemo software and click Refresh Device. The device list will display the current accessed keyboard. (The client should be closed). Remember the corresponding serial number (e.g., COM3) of the keyboard in the list, which will be used for upgrading the device in the following steps. Figure 5-1 Keyboard Demo Step 3 Select a device from the list and click Upgrade. Step 4 In the prompt window after the upgrade command is sent from the DEMO, click OK to continue. 18
![](/manual_guide/products/hikvision-ds1005ki-user-manual-2fe95a6/19.png)