Hikvision DS-2CE12DFT-PIRXOF User Manual - Page 14
Smart Light, Functions
View all Hikvision DS-2CE12DFT-PIRXOF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
between two frames besides processing the noise in one frame. The noise will be much less and the video will be clearer. MIRROR OFF, H, V, and HV are selectable for mirror. OFF: The mirror function is disabled. H: The image flips 180° horizontally. V: The image flips 180° vertically. HV: The image flips 180° both horizontally and vertically. 3.4 SMART LIGHT Under the SMART LIGHT sub-menu, you can set the mode to OFF or AUTO. OFF Set it to OFF to give up this function. AUTO You can set THRESHOLD and LEVEL in this section. SMART LIGHT LIGHT THR ESHOLD LEVEL AUTO 2 5 MODE BAC K EXIT SAVE & EXIT MODE1 Figure 3-5 SMART LIGHT 3.5 FUNCTIONS 3.5.1 PIR LEVEL Adjust the sensitivity of the PIR module. The higher the value is, the more sensitive the PIR module is. Note: This function is only showed when you switch the video output to TVI mode. 3.5.2 PIR DET MODE You can set the PIR DET MODE to INDOOR or OUTDOOR to meet your needs. Note: This function is only showed when you switch the video output to TVI mode. 3.5.3 ALARM TIME ALARM TIME refers to the duration of audible and visual alarm. 3.5.4 VOLUME You can set the volume to HIGH, MEDIUM, or LOW. 3.5.5 MOTION DET MOTION DET refers to motion detection. With motion detection feature, motion can be detected in any part of a camera's view. You can configure full screen or a number of zones in a camera's view where motion is to be detected. 3.5.6 PRIVACY This function allows you to block or mask certain area of a scene, for preventing the personal privacy from recording or live viewing. You can turn on/off the PRIVACY to meet your needs.