Hikvision DS-2CE12DFT-PIRXOF User Manual - Page 7
A Coin
View all Hikvision DS-2CE12DFT-PIRXOF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Junction Box Body Figure 2-6 Secure the Junction Box on the Wall/Ceiling 6. Route the cables through the bottom cable hole, or the side cable hole of the junction box. 7. Combine the junction box cover with its body. Figure 2-7 Combine the Junction Box Cover back to its Body 8. Repeat the step 5 to 6 of 2.1.1 Ceiling/Wall Mounting without Junction Box to finish the installation. 2.2 Installation of Type II Camera 2.2.1 Ceiling/Wall Mounting without Junction Box Before you start: The installation of ceiling mounting and wall mounting are similar. Following takes ceiling mounting as an example. Steps: 1. Disassemble the camera by rotating the camera to align the notch to one of the line, as shown in the figure below. Notch Figure 2-8 Dissemble the Camera 2. Pry the mounting base by using a flat object, for example, a coin. A Coin Figure 2-9 Pry the Mounting Base