Hikvision DS-2CE12DFT-PIRXOF User Manual - Page 3
Safety Instruction, Warnings, Cautions, Warnings, Cautions
View all Hikvision DS-2CE12DFT-PIRXOF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into "Warnings" and "Cautions". Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected. Warnings Follow these safeguards to prevent serious injury or death. Cautions Follow these precautions to prevent potential injury or material damage. Warnings In the use of the device, you must be in strict compliance with the electrical safety regulations of the nation and region. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 12 VDC according to the IEC60950-1 standard. Refer to technical specifications for detailed information. Do not connect multiple devices to one power adapter to avoid over-heating or a fire hazard caused by overload. Make sure that the plug is firmly connected to the power socket. Make sure that the device is firmly fixed if wall mounting or ceiling mounting is adopted. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cord, and then contact the service center. Never attempt to disassemble the camera by unprofessional personal. Cautions Do not drop the camera or subject it to physical shock. Do not touch senor modules with fingers. Do not place the camera in extremely hot, cold (the operating temperature shall be -40°C to 60°C), dusty or damp locations, and do not expose it to high electromagnetic radiation. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. Do not aim the camera at the sun or extra bright places. The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam. Do not expose the device to high electromagnetic radiation or extremely hot, cold, dusty or damp environment. To avoid heat accumulation, good ventilation is required for the operating environment.