Hikvision DS-2CE12DFT-PIRXOF User Manual - Page 5

2 Installation Before you start  Make sure that the device in the package is in good condition and all the assembly parts are included.  Make sure that all the related equipment is power-off during the installation.  Check the specification of the products for the installation environment.  Check whether the power supply is matched with your power output to avoid the damage.  Make sure the wall is strong enough to withstand three times the weight of the camera, and the mount.  If the wall is cement, insert expansion bolts before installing the camera. If the wall is wooden, use self-tapping screws to secure the camera.  If the product does not function properly, contact your dealer or the nearest service center. Do NOT disassemble the camera for repair or maintenance by yourself. 2.1 Installation of Type I Camera 2.1.1 Ceiling/Wall Mounting without Junction Box Before you start: The installation of ceiling mounting and wall mounting are similar. Following takes ceiling mounting as an example. Steps: 1. Paste the drill template (supplied) to the place where you want to install the camera. 2. Drill the screw holes and the cable hole (optional) on the ceiling according to the drill template. Screw Hole Ceiling Outlet Template Side Opening Figure 2-1 Drill Template Note: Drill the cable hole, when adopting the ceiling outlet to route the cable. 3. Route the cables through the cable hole, or the side opening. 4. Attach the bracket to the ceiling, and secure the camera with supplied screws. Figure 2-2 Attach the Camera to the Ceiling