Hitachi 7K250 Specifications - Page 107
Advanced Power Management feature set APM
UPC - 000004558972
View all Hitachi 7K250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
10.14 Advanced Power Management feature set (APM) This feature allows the host to select an advanced power management level. The advanced power management level is a scale from the lowest power consumption setting of 01h to the maximum performance level of FEh. Device performance may increase with increasing advanced power management levels. Device power consumption may increase with increasing advanced power management levels. The advanced power management levels contain discrete bands described in the section of SET FEATURES command in detail. This feature set uses the following functions: • A SET FEATURES subcommand to enable Advanced Power Management • A SET FEATURES subcommand to disable Advanced Power Management Advanced Power Management, Automatic Acoustic Management, and the Standby timer setting are independent functions. The device shall enter Standby mode if any of the following are true: 1. The Standby timer has been set and times out 2. Automatic Power Management is enabled and the associated algorithm indicates that the Standby mode should be entered to save power 3. Automatic Acoustic Management is enabled and the associated algorithm indicates that the Standby mode should be entered to reduce acoustical emanations The IDENTIFY DEVICE response word 83, bit 3 indicates that Advanced Power Management feature is supported if set. Word 86, bit 3 indicates that Advanced Power Management is enabled if set. Word 91, bits 7-0 contains the current Advanced Power Management level if it is enabled. Deskstar 7K250 Hard Disk Drive Specification 93