Hitachi 7K250 Specifications - Page 138
Time required for Enhanced Security Erase completion
![]() |
UPC - 000004558972
View all Hitachi 7K250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Table 66: Identify device information (Part 5 of 7 Word 86 87 88 89 90 91 92 Content Description XXXXH Command set supported 15-14 Reserved 13 FLUSH CACHE EXT command supported 12 FLUSH CACHE command supported 11 Device Configuration Overlay command supported 10 48-bit Address Feature Set supported 9 Automatic Acoustic Management enabled 8 SET Max Security extension enabled 7 Set Features Address Offset Feature mode 6 Set Features subcommand required to spin-up after power- up 5 Power-Up In Standby feature set enabled 4 Removable Media Status Notification feature 3 Advanced Power Management Feature Set 2 CFA feature set 1 READ/WRITE DMA QUEUED 0 DOWNLOAD MICROCODE command 4023H Command set/feature enabled 15-14(=01) Word 87 is valid 13- 6(=0) Reserved 5(=1) General Purpose Logging feature set supported 4-2(=0) Reserved 1(=1) SMART self-test supported 0(=1) SMART error logging supported 0X3FH Ultra DMA transfer modes 15- 8(=xx Current active Ultra DMA transfer mode 15-14 Reserved (=0) 13 Mode 5 1=Active 0=Not Active 12 Mode 4 1=Active 0=Not Active 11 Mode 3 1=Active 0=Not Active 10 Mode 2 1=Active 0=Not Active 9 Mode 1 1=Active 0=Not Active 8 Mode 0 1=Active 0=Not Active 7- 0(=3F) Ultra DMA transfer mode supported 5 Mode 5 1=Support 4 Mode 4 1=Support 3 Mode 3 1=Support 2 Mode 2 1=Support 1 Mode 1 1=Support 0 Mode 0 1=Support XXXXH Time required for Security Erase Unit completion Time= value x 2 [minutes] 0000H Time required for Enhanced Security Erase completion 0000H Current Advanced Power Management value FFFEH Master Password Revision Code Deskstar 7K250 Hard Disk Drive Specification 124
![](/manual_guide/products/hitachi-7k250-specifications-51f2e5f/138.png)