Hitachi CM751 User Manual - Page 13

ADJUSTMENT (Continue) Select Item Switch ight incushion ight rapezoid olour Select shrinks the right top side, and expands the right bottom side. changes the colour to No.4 : User (if available) Zolour 3alance &and m Red simultaneously. Nhen Green or Blue is selected. & is valid singly. GreenI m I@J and m simultaneously. 1P/hen Blue or Red is selected, & is valid singly. j&and @J Blue simultaneously. When Green or Red is selected, @J is valid singly Coloulr 1(This operation is Resel valid only wher R e d , G r e e n OI Blue is selectee already.) makes the Red stronger. =&q$ When the Red reaches the upper limit, it makes the Green and Blue weaker. IF&l makes the Green and Blue stronger. &&I When the Green or Blue reaches the upper limit, it makes the Red weaker. makes the Green stronger. When the Green reaches the upper limit, it makes the Blue and Red 1 weaker. makes the Blue and Red stronger. When the Blue or Red reaches the upper limit, it makes the Green weaker. makes the Blue stronger. When the Blue reaches the uppel limit, it makes the Red and Greer weaker. simultaneously, for about 2 seconds. makes the Red and Green stronger. When the Red or Greene reaches thr upper limit, it makes the Blue weaker. cancels the currently adjusted colour and calls the colour condition of the previously selected colour mode. H The mode "No.4:USER" is not factory set, and it is programmable if desired. 1^. After adjustment of "Colour Balance" (Red, Green or Blue) and "STORE" (refer to page 13). your colour balance will be restored by selecting "No.4:User". 11