Hitachi CPD10WALLARM Operating Guide - Page 19

Operating Using the automatic adjustment feature 1. Press the AUTO button on the remote control. Pressing this button performs the following. For a computer signal The vertical position, the horizontal position and the horizontal phase will be automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting. AUTO button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP ON 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 POSITION MENU For a video signal and s-video signal The video format best suited for the respective input signal will be selected automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu ( 32). The vertical position and horizontal position will be automatically set to the default. For a component video signal The vertical position and horizontal position will be automatically set to the default. The horizontal phase will be automatically adjusted. ● The automatic adjustment operation requires approx. 10 seconds. Also please note that it may not function correctly with some input. ● When this function is performed for a video signal, a certain extra such as a line may appear outside a picture. ● When this function is performed for a computer signal, a black frame may be displayed on the edge of the screen, depending on the PC model. ● The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu ( 45). Adjusting the position 1. Press the POSITION button on the remote control while no menu is on screen, to display the D-SHIFT dialog on screen. 2. Use the and ► buttons to adjust the picture position. Press the POSITION button again to finish this operation. KEYSTONE MY BUTTON MUTE 1 2 POSITION MENU ESC ENTER RESET POSITION button ● This is a function to shift the position of the shrunken picture by the D-ZOOM function. ● When an OSD (On Screen Display) menu is displayed, this operation moves the position of the OSD menu, but the picture position is not ( 23). ● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 512 (full screen). 19