Hitachi CPD10WALLARM Operating Guide - Page 35

Item SETUP menu Description Using the ▲/▼ cursor buttons switches the mode for mirror status. MIRROR NORMAL H:INVERT V:INVERT H&V:INVERT STANDBY MODE If the Transition Detector is on and the MIRROR status is changed, the TRANSITION DETECTOR ON alarm ( 50) will be displayed when projector is restarted after the AC power is turned off. Using ▲/▼ cursor buttons switches the standby mode setting between the NORMAL and the SAVING. NORMAL SAVING When the SAVING is selected, the power consumption in the standby state is lowered with some functional restriction as below: • When the SAVING is selected, the RS-232C communication control is disabled except to turn the projector on while the projector is in the standby state. • When the SAVING is selected, the STANDBY setting of MONITOR OUT ( below) is invalid, and no signal is output from the MONITOR OUT port in the standby state. • When the SAVING is selected, the AUDIO OUT STANDBY setting of the AUDIO SOURCE ( 36) is invalid, and no signal is output from the AUDIO OUT ports in the standby state. The combination of a picture shown on screen and output from the MONITOR OUT port can be arranged in the menu. The picture coming into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using ▲/▼ cursor buttons. COMPUTER IN1 COMPUTER IN2 STANDBY VIDEO S-VIDEO MONITOR OUT • Choose the STANDBY, to select the output signal from the MONITOR OUT port in the standby state. (2) Select one of the COMPUTER IN ports using the ◄/► cursor buttons. Choosing the COMPUTER IN1 allows the following choice. COMPUTER IN1 OFF Choosing the COMPUTER IN2 allows the following choice. COMPUTER IN2 OFF Choosing other input or the STANDBY allows the following choice. COMPUTER IN1 COMPUTER IN2 OFF • The OFF disables the MONITOR OUT port. 35