Hitachi CPD10WALLARM Operating Guide - Page 21

Operating Temporarily freezing the screen 1. Press the FREEZE button on the remote control. FREEZE button The "FREEZE" indication will appear on the screen (however, the indication will not appear when the OFF is selected for MY SOURCE/ VIDEO COMPUTER DOC.CAMERA the MESSAGE item in the SCREEN menu ( 39)), and the projector will go into the FREEZE mode, which the picture is ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP ON 㧗 frozen. DOWN OFF ࡯ To exit the FREEZE mode and restore the screen to normal, KEYSTONE MY BUTTON MUTE 1 2 press the FREEZE button again. ● The projector automatically exits from the FREEZE mode when some control buttons are pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. ● Images might appear degraded when this function is operated, but it is not a malfunction. Temporarily blanking the screen 1. Press the BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to the BLANK item in the SCREEN menu ( 37). To exit from the BLANK screen and return to the input signal screen, press the BLANK button again. BLANK button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY FREEZE PAGE VOLUME UP ON 㧗 DOWN OFF ࡯ KEYSTONE MY BUTTON MUTE 1 2 ● The projector automatically exits from the BLANK mode when some control buttons are pressed. CAUTION ►If you wish to have a blank screen while the projector's lamp is on, take one of items below. • Use the BLANK function above. Taking any other action may cause the damage on the projector. NOTE • The sound is not connected with the BLANK screen function. If necessary, set the volume or mute first. To display the BLANK screen and mute the sound at one time, use the AV MUTE function ( 44). 21